Building a Sustainable Future

Power Switchboards

PRODUCT HIGHLIGHTS :
  • Upto 4000A, 400/415V, 50Hz and with synchronizing controls for generators
  • Form of construction – 2,3,4
  • ASTA certified as per IEC 61349-1 & 2
  • ADDC approved upto 3200A
  • Rated short time withstand current, Icw: 50ka,3s
  • Rated peak with current, Ipk: 105ka
  • AADC, DEWA, SEWA, FEWA approved upto 4000A
  • ABB or other reputed make as per customer specifications

CAPACITOR BANK PANELS

PRODUCT HIGHLIGHTS :
  • Upto 4000A, 400/415V, 50Hz and with synchronizing controls for generators
  • Form of construction – 2,3,4
  • Modular Withdrawal and Fixed Type
  • ASTA certified as per IEC 61349-1 & 2
  • ADDC approved upto 3200A
  • Rated short time withstand current, Icw: 50ka,3s
  • Rated peak with current, Ipk: 105ka
  • AADC, DEWA, SEWA, FEWA approved upto 4000A
  • ABB or other reputed make as per customer specifications

METER CABINETS

PRODUCT HIGHLIGHTS :
  • Approved by Dubai Municipality, DEWA, RTA Dubai and ministry of public works
  • In GRP/Thermoplastic/Steel/Aluminum Enclosure
  • According to local authority specification and regulations

SUB MAIN DISTRIBUTION BOARD

PRODUCT HIGHLIGHTS :
  • Form of construction
  • Complying to local authority regulations and IEC standards
  • Upto 1250A with Incomer MCCB, Isolator ASTA certified

FINAL DISTRIBUTION BOARDS

PRODUCT HIGHLIGHTS :
  • Flush and surface mounted
  • Tailor made according to requirement and specifications

MOTOR CONTROL CENTER

PRODUCT HIGHLIGHTS :
  • Upto 4000A
  • Form 1,2,3 and 4
  • With drawable and fixed type
  • Complying to IEC 61439 – 1&2
  • Type-2 co-ordination as per IEC standards
  • Motor Management System
  • Provision for BMS control with mod bus communication
  • Manual and auto operations with relay based or PLC based control with VFDs/Soft starters
  • Speak to our Consultant

AUTOMATIC TRANSFER SWITCH (GENERATOR – MAINS)

PRODUCT HIGHLIGHTS :
  • We offer automatic mains failure panels that are installed for automatic change-over from mains to stand-by generator at the time of power failure. Fabricated from premium quality raw material, these automatic change-over are durable, corrosion resistant, dust & vermin proof. Easy to operate and install, the panels are used in areas like foundries, apartments, textiles, sugar and chemical industries.
  • Application
  • Auto/Manual selector is available
  • Auto delay in start of Genset
  • Genset stop with delay of 3 minutes
  • Manual Start & Stop Switch

We offer automatic mains failure panels that are installed for automatic change-over from mains to stand-by generator at the time of power failure. Fabricated from premium quality raw material, these automatic change-over are durable, corrosion resistant, dust & vermin proof. Easy to operate and install, the panels are used in areas like foundries, apartments, textiles, sugar and chemical industries. Application:

ATS panel & battery chargers are used where the generators are installed between main AC and load. It will start and stop the generator automatically and changeover the EB/Generator lines.

PLC & AUTOMATION PANELS

PRODUCT HIGHLIGHTS :
  • PLC panel design, manufacture, supply, testing and commissioning
  • In house software development of PLCs, HMI and SCADA
  • Industrial automation panels with ABB/Siemens PLCs
  • Irrigation and pump control panels with PLC
  • DDC panels Distech Controls/Schneider Electric
  • Motor Management System
  • Provision for BMS control with mod bus communication
  • Manual and auto operations with relay based or PLC based control with VFDs/Soft Starters

SYNCHRONIZING – PANELS

PRODUCT HIGHLIGHTS :

We manufacture high quality Synchronizing Panels with a capacity up to 2500A. This is widely used in the electrical, electronic, telecommunication and allied industry. The panels are indoor type Synchronizing and load sharing panels that are fully compartmentalized with IP42/52 degree of protection. We use premium electrical components such as copper busbar, insulator, wires/cables, PVC channels transformer, SMPS, meters and switches for fabricating the panels. These panels are offered for multiple DG/Gas Genset has the following working procedure:

  • To be operated in parallel are fast reliable
  • Synchronizing & precise KW load sharing
  • Inbuilt protections for engines, generators, Main like over current, overload, earth
  • Reverse power, over/under voltage, low oil pressure, high water temperature, over speed & SYNC CHECK_, AMF etc.
  • High performance
  • Easy operation
  • Easy to install
  • Lesser cost of maintenance